logo
Shanghai Tankii Alloy Material Co.,Ltd
Shanghai Tankii Alloy Material Co.,Ltd
prodotti
Casa. /

prodotti

1J80 Soft Magnetic Alloy Precision Alloy Strip with High Magnetic Permeability Low Core Loss and 0.1~10mm Diameter

Dettagli del prodotto

Luogo di origine: Cina

Marca: Tankii

Certificazione: ISO9001 Rohs

Numero di modello: 1J80

Termini di trasporto & di pagamento

Quantità di ordine minimo: 10KG

Prezzo: Negoziabile

Imballaggi particolari: cassa di legno

Tempi di consegna: 15-25 giorni

Termini di pagamento: L/C, T/T, Western Union

Capacità di alimentazione: 3000tons all'anno

Ottenga il migliore prezzo
Contatta ora
Specificità
Evidenziare:

1J80 soft magnetic alloy strip

,

precision alloy magnetic strip

,

high performance soft alloy strip

Modello.:
1J80
Condizione:
Morbido / duro
Certificato:
Magnetico (permeabilità e induzione magnetica)
Diametro:
0.1~10mm
Pacchetto di trasporto:
cassa di legno
Capacità produttiva:
3000 tonnellate/anno
Codice SA:
750522000
Modello.:
1J80
Condizione:
Morbido / duro
Certificato:
Magnetico (permeabilità e induzione magnetica)
Diametro:
0.1~10mm
Pacchetto di trasporto:
cassa di legno
Capacità produttiva:
3000 tonnellate/anno
Codice SA:
750522000
Descrizione
1J80 Soft Magnetic Alloy Precision Alloy Strip with High Magnetic Permeability Low Core Loss and 0.1~10mm Diameter

Soft magnetic alloys 1J80 / FeNi 80 / Ni80Cr3Si:

Mainly used in two areas for energy conversion and information processing

In the power industry, mainly in the high magnetic field has a high magnetic induction and low core loss of the alloy. In the electronics industry, mainly at low or medium alloy having a high magnetic permeability and low coercive force. At high frequencies shall be made on a thin strip or alloy higher resistivity. Usually with sheet or strip.

Soft magnetic materials in exchange for use, due to the alternating magnetic eddy currents are induced inside the material, resulting in the loss, the smaller the resistance of the alloy, the greater the thickness, the higher the frequency of the alternating magnetic field, eddy current losses greater, magnetic reduce more. For this, the material must be made thinner sheet (tape), and the surface coated with an insulating layer, or the use of certain methods to the surface to form an oxide insulating layer, such alloys commonly used magnesium oxide electrophoresis coating.

Iron-nickel alloy mostly in the alternating magnetic field use, mainly for yoke iron, relay, Small Power Transformers and Magnetically shielded.

composition C P S Mn Si
Content(%) 0.03 0.02 0.02 0.60~1.10 1.10~1.50
composition Ni Cr Mo Cu Fe
Content(%) 79.0~81.5 2.60~3.00 - ≤0.2 Bal
Invii la vostra indagine
Prego inviici la vostra richiesta e risponderemo appena possibile voi.
Invii